FH-X5SS
Features and uses (%)
This type of powder is a heavy silicon modified moisture-proof electrical grade magnesium oxide powder, suitable for the production of non-air-fired electric heating elements (such as strong convection and contact heat conduction such as copper, copper-plated iron pipe or stainless steel pipe), and meets the needs of different grades of products, 150mm Local annealing heat treatment and other processes have strong moisture resistance and can be easily sealed. It is recommended that the components be dried at 200°C-350°C/2-4 hours before annealing heat treatment or sealing.
Applies to:
Various low-power load heating pipes such as washing machine pipes, water dispenser pipes, soymilk pipes, electric iron pipes, coffee pot pipes, etc.
Type: Heavy silicon modified moisture-proof electrical grade magnesium oxide low temperature powder
Product model: FH-5 FH-5B FH-X5SS
Features and uses:
This type of powder is a heavy silicon modified moisture-proof electrical grade magnesium oxide powder, suitable for the production of non-air-fired electric heating elements (such as strong convection and contact heat conduction such as copper, copper-plated iron pipe or stainless steel pipe), and meets the needs of different grades of products, 150mm Local annealing heat treatment and other processes have strong moisture resistance and can be easily sealed. It is recommended that the components be dried at 200°C-350°C/2-4 hours before annealing heat treatment or sealing.
Applicable to: various low-power load heating pipes such as washing machine pipes, water dispenser pipes, soymilk pipes, electric iron pipes, coffee pot pipes, etc.
Chemical index
| Main chemical composition% | |||||
| MgO | SiO2 | CaO | Fe2O3 | Al2O3 | LOI |
| ≥93 | ≤2.5 | ≤2.5 | ≤0.8 | ≤0.9 | ≤0.20 |
Physical index
| Tap density T.D. （g/cm3） | Flow rate (F.R s/100g) | ||||||
| 2.25--2.38 | 175±20 | ||||||
| Mesh | +40 | +60 | +80 | +150 | +200 | +325 | -325 |
| Particle size (㎛) | +425 | +250 | +180 | +110 | +75 | +45 | -45 |
| Content(%) | ≤0.5 | 25±8 | 25±8 | 15±5 | 10±5 | 8±3 | 5±3 |
Electrical performance
Test Conditions:
Pipe............Copper-plated iron pipe
Shrink tube…………φ8.0mm → 6.6mm
Wire…………0Cr25A15, φ0.3mm
Coil…………φ2.2mm
Heating length…………29.0cm-32.0cm
Power-on time...15 minutes
Packing: 25KG carton or woven bag, or according to customer requirements.
Security and storage:
Electrical grade magnesium oxide powder is non-toxic and has a small amount of dust. It is recommended to wear masks and gloves during use. The product should be stored in a dry place, and it is recommended to use it within 12 months after leaving the factory.
1) Strong moisture resistance:
This type of product has a moisture-proof capacity of 1x106MΩ. After being exposed to moisture test (humidity 92% and temperature 50°C) for a long time for more than 72 hours without sealing, the insulation capacity has not decreased; strong moisture-proof ability can greatly improve the production cycle. To reduce the requirements of the sealing material, simply seal with ordinary silica gel.
2) Strong insulation capacity:
Even if it is used in electric heating components with low working temperature and very high insulation performance requirements; products of different specifications and grades can be selected according to the technical indicators of electric heating components.
3) This product has uniform color, beautiful appearance and low dust, which is beneficial to improve the environment of adding powder.
Note: The above shows the typical performance value of this specification electrical grade magnesium oxide powder, for the user's reference when choosing.
